Biometrics

Virdi

Virdi Fingerprint Door Locks

ViRDI 430FP

Function
  • It is convenient to use as it does not require users to carry special tools for verification. It is a high-tech fingerprint recognition system that uses fingerprints that have no risk of replication or unauthorized use.
  • It is designed to be safe from static electricity and electric shock.
  • It can register up to 100 users (basic 30 users) and can be used for multiple users.
  • The device operates using fingerprint, password, or emergency key and enables various methods of access.
  • Obtained IPX4, the international waterproofing standard! It can be installed virtually any location.
  • Uses mortise lock that is inserted inside the door for maximum safety.
  • When battery is completely used up, an outside power terminal is used to supply power.
  • Uses a cover that is automatically opened by Cover Open button for beautiful appearance.
  • When battery needs to be exchanged or entry door is not completely shut, the device gives warning signal.
  • When the door is not opened within 10 seconds from user authentication, it is automatically locked again to prevent mistaken authorization.
  • The colored LEP on keypad enables easy viewing at night and makes the device look better for the users.
  • Internal open/close buttons cannot be accessed through milk or newspaper openings.
  • When device cannot be operated, emergency key can be used to grant access.
  • The device can be easily converted from hope mode to office mode for administrators.
  • Able to select automatic lock feature after entering to make it easy to use when moving in or granting access to relatives who are not registered.
Short Description
  • The Best Design! The Ultimate Convenience!
  • VIRDI 430FP overcomes the design limitation of main-key door locks and achieves sophisticated, beautifully curved technological designs. Best solution for modern housing and offices.
Specification
Built-in Door Knob Yes
Door Thickness 40 ~ 50mm(default) / adjustable
Lock Type Motor lock (mortise type)
Power Supply 1.5V AA Alkaline 8EA
Battery Life Span Approx. 12 months(20 times per day)
Template Capacity 200
Operation Environment -20 ~ 50°C / Lower than 90% RH (Non-condensing)
Standard Compliance CE, FCC, IPX4
Sensor Type Optical
Resolution 500 dpi
Identification (1:N) Time < 1 sec
FRR / FAR 0.1%/ 0.0001%
Material External Body Aluminum die casting

Internal Body Aluminum die casting

Battery Cover ABS plastic

Dimension External Body 76mm(W)X321mm(H)X56mm(D)

Internal Body 76mm(W)X300mm(H)X28mm(D)

Photo

ViRDI430FP

ViRDI430FP

ViRDI DL473FR

Function
  • It is convenient to use as it does not require users to carry special tools for verification. It is a high-tech fingerprint recognition system that uses fingerprints that have no risk of replication or unauthorized use.
  • Can distinguish from different types of material such as paper, film, rubber, silicon etc.
  • 125KHz proximity card module is attached onto DL-471FR to use with unclear fingerprints.
  • Highly flexible for interference with any kinds of existing mechanical or electrical lock types.
  • Built in thermal sensor for automatic unlocking.
  • IPX3 rating the international waterproofing standard! It can be installed in virtually any location.
  • When battery is completely used up, an outside power terminal is used to supply power.
  • Designed to be safe from static electricity and electric shock.
  • When battery needs replacement or entry door is not completely shut, the device gives a warning signal.
  • Providing STA Manager S/W which features below

    - Interfacing with DL-471FR for operation through USB Host connector

    - User enrollment and management

    - Door lock configuration setting

    - Door lock schedule management

    - Firmware upgrade

Short Description
  • DL-473FR is an intergrated all-in-one fingerprint autherntication and RF card reader system with automatic or manual lock control.
Specification
Built-in Door Knob No
Door Thickness 35 ~ 55mm(Default) / Adjustable
Lock Type 6V Electric Lock
Power Supply 1.5V AA Alkaline 4EA
Battery Life Span Approx. 7 months(20 times per day)
Template Capacity 100
RF Card Capacity 50
Communication USB
Operation Environment -20 ~ 50°C / Lower than 90% RH (Non-condensing)
Standard Compliance IPX3, CE/FCC(In progress)
Sensor Type Optical
Resolution 500 dpi
Identification (1:N) Time < 1 sec
FRR / FAR 0.1%/ 0.0001%
Material External Body Aluminum die casting

Internal Body ABS plastic

Battery Cover ABS plastic

Dimension External Body 59mm(W)x124mm(H)x38mm(D)

Internal Body 84mm(W)x147mm(H)x44mm(D)

Photo

ViRDI473FR

ViRDI473FR