Wireless Telemetry & M2M Solution

Four-Faith Communication

Zigbee

F8114 ZigBee+GPRS IP MODEM

Overview F8114 ZigBee+GPRS IP MODEM is a kind of data terminal device that provides data transfer function by public GPRS and ZigBee network. It adopts high-powered industrial 32 bits CPU and embedded real time operating system. It supports RS232, RS485 (or RS422) and ZigBee port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial and ZigBee devices with only basic configuration. It has low power consumption states in which the power consumption could be 1ower than 1mA@12VDC. It has compatible digital I/O channel, ADC, input pulse counter and pulse wave output function.
Key Features
  • High-powered industrial ZigBee processing chip.
  • High-powered industrial cellular module.
  • High-powered industrial 32 bits CPU.
  • Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest.
  • Iron housing, IP30 protection.
  • Wide power range, DC 5~35V.
  • Support hardware and software WDT.
  • Support auto recovery mechanism, including online detect, auto redial when offline to make it always online.
  • Support standard RS232, RS485(or RS422) and ZigBee port that can connect to serial and ZigBee devices directly.
  • Support repeater and terminal device function.
  • Support data transfer by cellular and ZigBee network.
  • Support center node, route node and terminal node.
  • Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout.
  • Design with standard TCP/IP protocol stack.
  • Support APN/VPDN
  • Supply 5 I/O channels, compatible 2 pulse wave output channels, 2 analog inputs and one pulse input counters.
Application Examples
Datasheet F8114 ZigBee+GPRS IP MODEMF8114 ZigBee+GPRS IP MODEM
Photo

F8114

F8114

F8414 ZigBee+WCDMA IP MODEM

Overview F8414 ZigBee+WCDMA/HSDPA/HSUPA IP MODEM is a kind of data terminal device that provides data transfer function by public WCDMA/HSDPA/HSUPA and ZigBee network. It adopts high-powered industrial 32 bits CPU and embedded real time operating system. It supports RS232, RS485 (or RS422) and ZigBee port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial and ZigBee devices with only basic configuration. It has low power consumption states in which the power consumption could be 1ower than 1mA@12VDC. It has compatible digital I/O channel, ADC, input pulse counter and pulse wave output function.
Key Features
  • High-powered industrial ZigBee processing chip.
  • High-powered industrial cellular module.
  • High-powered industrial 32 bits CPU.
  • Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest.
  • Iron housing, IP30 protection.
  • Wide power range, DC 5~35V.
  • Support hardware and software WDT.
  • Support auto recovery mechanism, including online detect, auto redial when offline to make it always online.
  • Support standard RS232, RS485(or RS422) and ZigBee port that can connect to serial and ZigBee devices directly.
  • Support repeater and terminal device function.
  • Support data transfer by cellular and ZigBee network.
  • Support center node, route node and terminal node.
  • Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout.
  • Design with standard TCP/IP protocol stack.
  • Support APN/VPDN
  • Supply 5 I/O channels, compatible 2 pulse wave output channels, 2 analog inputs and one pulse input counters.
Application Examples
Datasheet F8414 ZigBee+WCDMA IP MODEMF8414 ZigBee+WCDMA IP MODEM
Photo

F8414

F8414

F8914 ZigBee Terminal

Overview F8914 ZigBee Terminal is a kind of data cellular terminal device that provides data transfer function by ZigBee network. It adopts high-powered industrial ZigBee solution and embedded real time operating system. It supports RS232 and RS485 (or RS422) port that can conveniently and transparently connect one device to a ZigBee network, allowing you to connect to your existing serial devices with only basic configuration .It has low power consumption states in which the power consumption could be 1ower than 1mA@12VDC. It has compatible digital I/O channel, ADC, input pulse counter and pulse wave output function.
Key Features
  • High-powered industrial ZigBee processing chip.
  • Low power consumption design, support multi-sleep and trigger modes to reduce the power dissipation farthest.
  • Iron housing, IP30 protection.
  • Wide power range, DC 5~35V.
  • Support hardware and software WDT.
  • Adopt terminal block interface, convenient for industrial application.
  • Support standard RS232/RS485 ports that can connect to serial devices directly.
  • Support repeater and terminal device function.
  • Support Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh network.
  • Support 65000 nodes.
  • Support center node, route node and terminal node.
  • Support broadcast and target address transfer.
  • Supply 3 I/O channels, compatible 3pulse wave output channels, 3 analog inputs and 3 pulse input counters.
Application Examples
Datasheet F8914 ZigBee TerminalF8914 ZigBee Terminal
Photo

F8914

F8914